Study on Auto-DR and Pre-cooling of Commercial Buildings with Thermal Mass in California

TitleStudy on Auto-DR and Pre-cooling of Commercial Buildings with Thermal Mass in California
Publication TypeJournal Article
LBNL Report NumberLBNL-3541e
Year of Publication2010
AuthorsYin, Rongxin, Peng Xu, Mary Ann Piette, and Sila Kiliccote
JournalEnergy and Buildings
Volume42
Issue7
Pagination967-975
Date Published07/2010
Keywordsauto-dr, demand response, demand response and distributed energy resources center, demand response research center, demand shed, demand shifting (pre-cooling), DRQAT, peak demand, pre-cooling, thermal mass
Abstract

This paper studies how to optimize pre-cooling strategies for buildings in a hot climate zone of California with the assistance of a building energy simulation tool - Demand Response Quick Assessment Tool (DRQAT). This paper outlines the procedure to develop and calibrate simulation models by using DRQAT, and then applies this procedure into 11 field test buildings. Through comparing the measured demand savings during the peak period with those of simulation model, the results indicate that the predicted demand shed match well with the actual data on Auto-DR days. The study shows that after refining and calibrating initial models with actual measured data, the accuracy of the models can be greatly improved and the models can be used to predict load reductions for automated demand response events. In order to confirm the actual effect of demand response strategies, the simulation results were compared with field test data as well. The results indicated that the optimal demand response strategies worked well for most of buildings in hot climate zone.

Notes

received 7/11/09, revised 1/8/10, accepted 1/9/10

AttachmentSize
PDF1.22 MB