Potential benefits of solar reflective car shells: Cooler cabins, fuel savings and emission reductions

TitlePotential benefits of solar reflective car shells: Cooler cabins, fuel savings and emission reductions
Publication TypeJournal Article
Year of Publication2011
AuthorsLevinson, Ronnen M., Heng Pan, George Ban-Weiss, Pablo Rosado, Riccardo Paolini, and Hashem Akbari
JournalApplied Energy
Volume88
Start Page4343
Issue12
Pagination4343-4357
Date Published12/2011
KeywordsADVISOR, Cool Cars, Cool colored car, Heat Island, Solar reflective shell, Vehicle air conditioning, Vehicle emission reduction, Vehicle fuel economy, windows and envelope materials group
Abstract

Vehicle thermal loads and air conditioning ancillary loads are strongly influenced by the absorption of solar energy. The adoption of solar reflective coatings for opaque surfaces of the vehicle shell can decrease the "soak" temperature of the air in the cabin of a vehicle parked in the sun, potentially reducing the vehicle's ancillary load and improving its fuel economy by permitting the use of a smaller air conditioner. An experimental comparison of otherwise identical black and silver compact sedans indicated that increasing the solar reflectance (ρ) of the car's shell by about 0.5 lowered the soak temperature of breath-level air by about 5–6 °C. Thermal analysis predicts that the air conditioning capacity required to cool the cabin air in the silver car to 25 °C within 30 min is 13% less than that required in the black car. Assuming that potential reductions in AC capacity and engine ancillary load scale linearly with increase in shell solar reflectance, ADVISOR simulations of the SC03 driving cycle indicate that substituting a typical cool-colored shell (ρ = 0.35) for a black shell (ρ = 0.05) would reduce fuel consumption by 0.12 L per 100 km (1.1%), increasing fuel economy by 0.10 km L−1 [0.24 mpg] (1.1%). It would also decrease carbon dioxide (CO2) emissions by 2.7 g km−1 (1.1%), nitrogen oxide (NOx) emissions by 5.4 mg km−1 (0.44%), carbon monoxide (CO) emissions by 17 mg km−1 (0.43%), and hydrocarbon (HC) emissions by 4.1 mg km−1 (0.37%). Selecting a typical white or silver shell (ρ = 0.60) instead of a black shell would lower fuel consumption by 0.21 L per 100 km (1.9%), raising fuel economy by 0.19 km L−1 [0.44 mpg] (2.0%). It would also decrease CO2 emissions by 4.9 g km−1 (1.9%), NOx emissions by 9.9 mg km−1 (0.80%), CO emissions by 31 mg km−1 (0.79%), and HC emissions by 7.4 mg km−1 (0.67%). Our simulations may underestimate emission reductions because emissions in standardized driving cycles are typically lower than those in real-world driving.

URLhttp://dx.doi.org/10.1016/j.apenergy.2011.05.006
DOIdoi:10.1016/j.apenergy.2011.05.006