|Title||Measuring solar reflectance—Part I: Defining a metric that accurately predicts solar heat gain|
|Publication Type||Journal Article|
|Year of Publication||2010|
|Authors||Levinson, Ronnen M., Hashem Akbari, and Paul Berdahl|
|Keywords||Heat Island, Methods & Protocols, Pyranometer, Solar heat gain, Solar reflectance, Solar spectrophotometer, Solar Spectrum Reflectometer, Spectrally selective|
Solar reflectance can vary with the spectral and angular distributions of incident sunlight, which in turn depend on surface orientation, solar position and atmospheric conditions. A widely used solar reflectance metric based on the ASTM Standard E891 beam-normal solar spectral irradiance underestimates the solar heat gain of a spectrally selective “cool colored” surface because this irradiance contains a greater fraction of near-infrared light than typically found in ordinary (unconcentrated) global sunlight. At mainland US latitudes, this metric RE891BN can underestimate the annual peak solar heat gain of a typical roof or pavement (slope ⩽ 5:12 [23°]) by as much as 89 W m−2, and underestimate its peak surface temperature by up to 5 K. Using RE891BN to characterize roofs in a building energy simulation can exaggerate the economic value N of annual cool roof net energy savings by as much as 23%.
We define clear sky air mass one global horizontal (“AM1GH”) solar reflectance Rg,0, a simple and easily measured property that more accurately predicts solar heat gain. Rg,0 predicts the annual peak solar heat gain of a roof or pavement to within 2 W m−2, and overestimates N by no more than 3%. Rg,0 is well suited to rating the solar reflectances of roofs, pavements and walls. We show in Part II that Rg,0 can be easily and accurately measured with a pyranometer, a solar spectrophotometer or version 6 of the Solar Spectrum Reflectometer.