![]() |
|
|
|||||||||||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||||||||||||
|
|
|
|
||||||||||||||||||||||||||||||||
Indoor VOC's
Concentrations of VOCs in New Houses The predominant VOCs in the two house types included alpha-pinene, ethylene glycol, formaldehyde, acetaldehyde, hexanal and acetic acid. The GM formaldehyde concentration for the 4 manufactured houses was less than one-half the historical value for manufactured houses and all of the values were less than 50 ppb, a concentration guideline established in California ( http://www.arb.ca.gov/research/indoor/formald.htm). The concentrations in the 7 site-built houses were similar with only two values somewhat in excess of 50 ppb. The similarity between the manufactured and site-built houses may have been due to the general similarity of their interior construction practices and materials.
VOCs in New Houses That are of Concern with Respect to Odor and Sensory Irritation Many VOCs are known to produce sensory irritation to the eyes and upper respiratory tract. Most of the data and guidance with respect to chemical irritants comes from industrial work environments. A number of the Threshold Limit Values (TLVs) developed for occupational exposures by the American Conference of Governmental Industrial Hygienists are based on irritant effects (http://www.acgih.org/TLV/). There is no clear guidance on how to adjust industrial TLVs based on irritancy to make them applicable to the general population. However, others have adopted an uncertainty factor of 40 to protect more sensitive populations. Comparison of maximum VOC concentrations in the houses with TLVs adjusted by a factor of 40 shows that formaldehyde concentrations consistently exceeded the guide value and that acetic acid concentrations approached and occasionally exceeded the guide value (Table 10). |
|||||||||||||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||