Wiser, Ryan H., Mark Bolinger, and Edward Holt. Customer Choice and Green Power Marketing: A Critical Review and Analysis of Experience to Date. Berkeley: LBNL, 2000.

Firestone, Ryan M.. Optimal Real-time Dispatch for Integrated Energy Systems. Berkeley: LBNL, 2007.

Firestone, Ryan M.. Distributed Energy Resources Customer Adoption ModelTechnology Data. Vol. 2005. Lawrence Berkeley National Laboratory, 2004.

Russo, Richard E., Xianglei Mao, and Oleg V. Borisov. Laser ablation sampling In Trac-Trends in Analytical Chemistry. Vol. 17., 1998.

Menon, Surabi, and Ronnen M. Levinson. Cool roofs and global cooling: a response to Jacobson & Ten Hoeve (2011)., 2011.

Chan, Wanyu R.. Assessing the effectiveness of shelter-in-place as an emergency response to large-scale outdoor chemical releases In Department of Civil and Environmental Engineering. Berkeley: University of California, Berkeley, 2006.

Walker, Iain S.. Attic Ventilation, Heat and Moisture Transfer In Department of Mechanical Engineering. Vol. Ph.D. University of Alberta, Edmonton, Alberta, Canada., 1993.

Sreedharan, Priya. Bayesian based design of real-time sensor systems for high-risk indoor contaminants In Mechanical Engineering. Berkeley: Lawrence Berkeley National Laboratory, 2008.

Sreedharan, Priya. Bayesian based design of real-time sensor systems for high-risk indoor contaminants In Mechanical Engineering. Berkeley: University of California, Berkeley, 2008.

Mathieu, Johanna L.. Design of a rural water provision system to decrease arsenic exposure in Bangladesh In Mechanical Engineering. Berkeley: University of California, Berkeley, 2009.

Diamond, Richard C.. Determinants of Energy Use in Housing for the Low-Income Elderly In Department of Architecture. Vol. Ph.D. Berkeley: University of California, Berkeley, 1986.

Wray, Craig P.. Development and Application of a Multizone Airflow and Contaminant Dispersal Analysis Microcomputer Program for Simulating Radon and Radon Progeny Transport and Accumulation in Soils and House with Basements In Department of Mechanical Engineering. Vol. Master of Science. University of Manitoba, 1990.

Navvab, M.. Development and Use of a Hemispherical Sky Simulator., 1981.

Ten Brinke, J.. Development of New VOC Exposure Metrics and their Relationship to "Sick Building Syndrome" Symptoms In Environmental Health Sciences, School of Public Health. Berkeley: University of California, Berkeley, 1995.

Addy, Susan E.. Electrochemical Arsenic Remediation for Rural Bangladesh In Physics. Berkeley: Lawrence Berkeley National Laboratory, 2008.

Shehabi, Arman. Energy Demands and Efficiency Strategies in Data Center Buildings In Civil and Environmental Engineering. Berkeley: University of California, Berkeley, 2009.

Koomey, Jonathan G.. Energy Efficiency in New Office Buildings: An Investigation of Market Failures and Corrective Policies., 2004.

Sreedharan, Priya. Evaluation of Chiller Modeling Approaches and Their Usability for Fault Detection In Mechanical Engineering. Berkeley, CA: U.C. Berkeley, 2001.

Wen, Sy-Bor. Experimental and theoretical study of laser ablation processes including vapor plume expansion, cooling, and condensation with an ambient gas., 2006.

Coleman, Beverly K.. Exposure-Relevant Ozone Chemistry in Occupied Spaces In Department of Civil and Environmental Engineering. Berkeley: University of California, Berkeley, 2009.

Mathieu, Johanna L.. Modeling, Analysis, and Control of Demand Response Resources In Engineering, Mechanical Engineering. Vol. Doctor of Philosophy in Mechanical Engineering. Berkeley: University of California, Berkeley, 2012.

Levinson, Ronnen M.. Near-Ground Cooling Efficacies of Trees and High-Albedo Surfaces. University of California, Berkeley, 1997.

Sailor, D.. Role of Surface Characteristics in Urban Meteorology and Air Quality. University of California, Berkeley, 1993.

Wetter, Michael. Simulation-Based Building Energy Optimization In Mechanical Engineering. Vol. Ph.D. Berkeley, CA, USA: University of California, Berkeley, 2004.

Walker, Iain S.. Single Zone Air Infiltration Modeling In Department of Mechanical Engineering. Edmonton: University of Alberta, 1989.